Automatique Modifié Amidon Machines

In recent years, 12.26 percent pregelatinized starch has been used in the preparation of peach gum sheets, and the product has the advantages of good elasticity, fast shaping, and moderate viscosity. When the dosage is lower than 12.26 percent , the finished product has poor elasticity and gelation. When the dosage is higher than 12.26 percent , The finished product has high hardness. 30 percent ~60 percent pregelatinized starch is used in construction cold water instant rubber powder. It has the characteristics of environmental protection, cold water instant dissolution, strong adhesion, good smoothness, easy storage and low cost. It can be mixed or separately use. The dosage is 1000~1650g per acre of 0.6-1 percent pregelatinized starch sprayed on the sandy land of the vineyard. It has moisturizing and sand-proof properties and can also penetrate into rain and snow water, maintaining a relatively complete sand shell as a whole and reducing sand-proof costs. At the same time, it can also increase the moisture and moisturizing effect of the sand. Pregelatinized starch is used in oil well drilling mud to increase the consistency and store water. Pregelatinized starch can be a good replacement for fluid loss control in non-destructive drilling fluids. It can stably control the rheology of the mud, but there are Pregelatinized starch is highly degradable, so the drilling speed of the oil layer is required to be as fast as possible.

​

​

​

Extrudeuse

Model: DSE65

Principal moteur: 22kw

Alimentation: 0.75kw

Rotatif coupe: 0.75kw

Chauffage puissance: 10kw

Capacité: 100-150kg/h

Taille: 19000*1300*2200mm

Vis matériau: 38CrMoAl

Huile pompe moteur: 0.37kw

​

Air convoyeur

Puissance: 1.1kw/1.5kw/2.2kw

Capacité: 0-2000kg/h

Matériau: Inox acier

​

Séche-cheveux

Type: Electric type (we also have oil/gas type and steam type)

Modèle: kx-3-5, Kx{1}}, KX{2}}, KX{3}}, Kx{4}}

Capacité: 100kgh vers 10tonnes/h

Matériau: Inox acier

​

Fraisage machine système

Modèle: FS-480

Installé puissance: 15kw

Capacity: 100-300 kg/h

Dimension: 1.3*0.7*2m

1. Nous avons professionnel faire formule que peut envoyer au client pour référence
2. Our engineer can design production line layout according to factory's sitruation
3. We will test machine before delivery and take videos and pictures for customer
4. We have 24 hours online consultant services. If you have any problems, just feel free to contact us.

Si le client besoins, nous pouvons organiser l’expédition par bateau. Le fiable fret transitaires nous coopérons avec volonté transport les marchandises vers le client's destination port

​

étiquette à chaud: